AT CORE documentation
getting started: after installation
Congratulations! If you're reading this, you have probably finished the installation of ATC on your website.To load the ATC admin, point your browser to http://www.yourdomain.com/cgi-bin/atc/x/admin.cgi
The default login is user / pass
After logging in, we advise you to setup the IP access filter.
Go to menu --> ATC --> settings --> ATC access IP masks
In this table, fill out your IP, or the first 3 octets.
To find out what your IP is, go to a site like http://www.whatismyip.com/
If your IP is 11.22.33.44, fill out 11.22.33 in the IP masks field.
This will allow every IP starting with 11.22.33 to login.
You can add several IPs, add 1 per line.
Now that you've limited access to your admin, don't forget to change the login data.
Go to menu --> ATC --> settings --> Username + Password
As you can see, the current login is set to user / pass.
Change this to a more secure combination
Remember your login, if you forget it we won't be able to retrieve it for you.
It is possible to completely reset your password however.
You're all set to modify your website to start trading traffic with AT Core
Continue to getting started: incoming hits
